Contributors: 2
Author Tokens Token Proportion Commits Commit Proportion
Vladimir Oltean 4844 96.53% 11 91.67%
Ioana Ciornei 174 3.47% 1 8.33%
Total 5018 12 


// SPDX-License-Identifier: GPL-2.0+
/* Copyright 2021-2026 NXP */

#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>

#include "phy-fsl-lynx-core.h"

/* SoC IP wrapper for protocol converters */
#define PCCR8				0x220
#define PCCR8_SGMIIa_KX			BIT(3)
#define PCCR8_SGMIIa_CFG		GENMASK(2, 0)

#define PCCR9				0x224
#define PCCR9_QSGMIIa_CFG		GENMASK(2, 0)
#define PCCR9_QXGMIIa_CFG		GENMASK(2, 0)

#define PCCRB				0x22c
#define PCCRB_XFIa_CFG			GENMASK(2, 0)
#define PCCRB_SXGMIIa_CFG		GENMASK(2, 0)

#define SGMII_CFG(id)			(28 - (id) * 4)
#define QSGMII_CFG(id)			(28 - (id) * 4)
#define SXGMII_CFG(id)			(28 - (id) * 4)
#define QXGMII_CFG(id)			(12 - (id) * 4)
#define XFI_CFG(id)			(28 - (id) * 4)

#define CR(x)				((x) * 4)

#define A				0
#define B				1
#define C				2
#define D				3
#define E				4
#define F				5
#define G				6
#define H				7

#define SGMIIaCR0(id)			(0x1800 + (id) * 0x10)
#define QSGMIIaCR0(id)			(0x1880 + (id) * 0x10)
#define XAUIaCR0(id)			(0x1900 + (id) * 0x10)
#define XFIaCR0(id)			(0x1980 + (id) * 0x10)
#define SXGMIIaCR0(id)			(0x1a80 + (id) * 0x10)
#define QXGMIIaCR0(id)			(0x1b00 + (id) * 0x20)

#define SGMIIaCR0_RST_SGM		BIT(31)
#define SGMIIaCR0_RST_SGM_OFF		SGMIIaCR0_RST_SGM
#define SGMIIaCR0_RST_SGM_ON		0
#define SGMIIaCR0_PD_SGM		BIT(30)
#define SGMIIaCR1_SGPCS_EN		BIT(11)
#define SGMIIaCR1_SGPCS_DIS		0x0

#define QSGMIIaCR0_RST_QSGM		BIT(31)
#define QSGMIIaCR0_RST_QSGM_OFF		QSGMIIaCR0_RST_QSGM
#define QSGMIIaCR0_RST_QSGM_ON		0
#define QSGMIIaCR0_PD_QSGM		BIT(30)

/* Per PLL registers */
#define PLLnCR0(pll)			((pll) * 0x20 + 0x4)

#define PLLnCR0_POFF			BIT(31)

#define PLLnCR0_REFCLK_SEL		GENMASK(30, 28)
#define PLLnCR0_REFCLK_SEL_100MHZ	0x0
#define PLLnCR0_REFCLK_SEL_125MHZ	0x1
#define PLLnCR0_REFCLK_SEL_156MHZ	0x2
#define PLLnCR0_REFCLK_SEL_150MHZ	0x3
#define PLLnCR0_REFCLK_SEL_161MHZ	0x4
#define PLLnCR0_PLL_LCK			BIT(23)
#define PLLnCR0_FRATE_SEL		GENMASK(19, 16)
#define PLLnCR0_FRATE_5G		0x0
#define PLLnCR0_FRATE_5_15625G		0x6
#define PLLnCR0_FRATE_4G		0x7
#define PLLnCR0_FRATE_3_125G		0x9
#define PLLnCR0_FRATE_3G		0xa

/* Per SerDes lane registers */

/* Lane a Protocol Select status register */
#define LNaPSSR0(lane)			(0x100 + (lane) * 0x20)
#define LNaPSSR0_TYPE			GENMASK(30, 26)
#define LNaPSSR0_IS_QUAD		GENMASK(25, 24)
#define LNaPSSR0_MAC			GENMASK(19, 16)
#define LNaPSSR0_PCS			GENMASK(10, 8)
#define LNaPSSR0_LANE			GENMASK(2, 0)

/* Lane a General Control Register */
#define LNaGCR0(lane)			(0x800 + (lane) * 0x40 + 0x0)
#define LNaGCR0_RPLL_PLLF		BIT(31)
#define LNaGCR0_RPLL_PLLS		0x0
#define LNaGCR0_RPLL_MSK		BIT(31)
#define LNaGCR0_RRAT_SEL		GENMASK(29, 28)
#define LNaGCR0_TRAT_SEL		GENMASK(25, 24)
#define LNaGCR0_TPLL_PLLF		BIT(27)
#define LNaGCR0_TPLL_PLLS		0x0
#define LNaGCR0_TPLL_MSK		BIT(27)
#define LNaGCR0_RRST_OFF		LNaGCR0_RRST
#define LNaGCR0_TRST_OFF		LNaGCR0_TRST
#define LNaGCR0_RRST_ON			0x0
#define LNaGCR0_TRST_ON			0x0
#define LNaGCR0_RRST			BIT(22)
#define LNaGCR0_TRST			BIT(21)
#define LNaGCR0_RX_PD			BIT(20)
#define LNaGCR0_TX_PD			BIT(19)
#define LNaGCR0_IF20BIT_EN		BIT(18)
#define LNaGCR0_PROTS			GENMASK(11, 7)

#define LNaGCR1(lane)			(0x800 + (lane) * 0x40 + 0x4)
#define LNaGCR1_RDAT_INV		BIT(31)
#define LNaGCR1_TDAT_INV		BIT(30)
#define LNaGCR1_OPAD_CTL		BIT(26)
#define LNaGCR1_REIDL_TH		GENMASK(22, 20)
#define LNaGCR1_REIDL_EX_SEL		GENMASK(19, 18)
#define LNaGCR1_REIDL_ET_SEL		GENMASK(17, 16)
#define LNaGCR1_REIDL_EX_MSB		BIT(15)
#define LNaGCR1_REIDL_ET_MSB		BIT(14)
#define LNaGCR1_REQ_CTL_SNP		BIT(13)
#define LNaGCR1_REQ_CDR_SNP		BIT(12)
#define LNaGCR1_TRSTDIR			BIT(7)
#define LNaGCR1_REQ_BIN_SNP		BIT(6)
#define LNaGCR1_ISLEW_RCTL		GENMASK(5, 4)
#define LNaGCR1_OSLEW_RCTL		GENMASK(1, 0)

#define LNaRECR0(lane)			(0x800 + (lane) * 0x40 + 0x10)
#define LNaRECR0_RXEQ_BST		BIT(28)
#define LNaRECR0_GK2OVD			GENMASK(27, 24)
#define LNaRECR0_GK3OVD			GENMASK(19, 16)
#define LNaRECR0_GK2OVD_EN		BIT(15)
#define LNaRECR0_GK3OVD_EN		BIT(14)
#define LNaRECR0_OSETOVD_EN		BIT(13)
#define LNaRECR0_BASE_WAND		GENMASK(11, 10)
#define LNaRECR0_OSETOVD		GENMASK(6, 0)

#define LNaTECR0(lane)			(0x800 + (lane) * 0x40 + 0x18)
#define LNaTECR0_TEQ_TYPE		GENMASK(29, 28)
#define LNaTECR0_SGN_PREQ		BIT(26)
#define LNaTECR0_RATIO_PREQ		GENMASK(25, 22)
#define LNaTECR0_SGN_POST1Q		BIT(21)
#define LNaTECR0_RATIO_PST1Q		GENMASK(20, 16)
#define LNaTECR0_ADPT_EQ		GENMASK(13, 8)
#define LNaTECR0_AMP_RED		GENMASK(5, 0)

#define LNaTTLCR0(lane)			(0x800 + (lane) * 0x40 + 0x20)
#define LNaTTLCR1(lane)			(0x800 + (lane) * 0x40 + 0x24)
#define LNaTTLCR2(lane)			(0x800 + (lane) * 0x40 + 0x28)

#define LNaTCSR3(lane)			(0x800 + (lane) * 0x40 + 0x3C)
#define LNaTCSR3_CDR_LCK		BIT(27)

enum lynx_10g_rat_sel {
	RAT_SEL_FULL = 0x0,
	RAT_SEL_HALF = 0x1,
	RAT_SEL_QUARTER = 0x2,
	RAT_SEL_DOUBLE = 0x3,
};

enum lynx_10g_eq_type {
	EQ_TYPE_NO_EQ = 0,
	EQ_TYPE_2TAP = 1,
	EQ_TYPE_3TAP = 2,
};

enum lynx_10g_proto_sel {
	PROTO_SEL_PCIE = 0,
	PROTO_SEL_SGMII_BASEX_KX_QSGMII = 1,
	PROTO_SEL_SATA = 2,
	PROTO_SEL_XAUI = 4,
	PROTO_SEL_XFI_10GBASER_KR_SXGMII = 0xa,
};

struct lynx_10g_proto_conf {
	int proto_sel;
	int if20bit_en;
	int reidl_th;
	int reidl_et_msb;
	int reidl_et_sel;
	int reidl_ex_msb;
	int reidl_ex_sel;
	int islew_rctl;
	int oslew_rctl;
	int rxeq_bst;
	int gk2ovd;
	int gk3ovd;
	int gk2ovd_en;
	int gk3ovd_en;
	int base_wand;
	int teq_type;
	int sgn_preq;
	int ratio_preq;
	int sgn_post1q;
	int ratio_post1q;
	int adpt_eq;
	int amp_red;
	int ttlcr0;
};

static const struct lynx_10g_proto_conf lynx_10g_proto_conf[LANE_MODE_MAX] = {
	[LANE_MODE_1000BASEX_SGMII] = {
		.proto_sel = PROTO_SEL_SGMII_BASEX_KX_QSGMII,
		.reidl_th = 1,
		.reidl_ex_sel = 3,
		.reidl_et_msb = 1,
		.islew_rctl = 1,
		.oslew_rctl = 1,
		.gk2ovd = 15,
		.gk3ovd = 15,
		.gk2ovd_en = 1,
		.gk3ovd_en = 1,
		.teq_type = EQ_TYPE_NO_EQ,
		.adpt_eq = 48,
		.amp_red = 6,
		.ttlcr0 = 0x39000400,
	},
	[LANE_MODE_2500BASEX] = {
		.proto_sel = PROTO_SEL_SGMII_BASEX_KX_QSGMII,
		.islew_rctl = 2,
		.oslew_rctl = 2,
		.teq_type = EQ_TYPE_2TAP,
		.sgn_post1q = 1,
		.ratio_post1q = 6,
		.adpt_eq = 48,
		.ttlcr0 = 0x00000400,
	},
	[LANE_MODE_QSGMII] = {
		.proto_sel = PROTO_SEL_SGMII_BASEX_KX_QSGMII,
		.islew_rctl = 1,
		.oslew_rctl = 1,
		.teq_type = EQ_TYPE_2TAP,
		.sgn_post1q = 1,
		.ratio_post1q = 6,
		.adpt_eq = 48,
		.amp_red = 2,
		.ttlcr0 = 0x00000400,
	},
	[LANE_MODE_10G_QXGMII] = {
		.proto_sel = PROTO_SEL_XFI_10GBASER_KR_SXGMII,
		.if20bit_en = 1,
		.islew_rctl = 1,
		.oslew_rctl = 1,
		.base_wand = 1,
		.teq_type = EQ_TYPE_NO_EQ,
		.adpt_eq = 48,
		.ttlcr0 = 0x00000400,
	},
	[LANE_MODE_USXGMII] = {
		.proto_sel = PROTO_SEL_XFI_10GBASER_KR_SXGMII,
		.if20bit_en = 1,
		.islew_rctl = 1,
		.oslew_rctl = 1,
		.base_wand = 1,
		.teq_type = EQ_TYPE_NO_EQ,
		.sgn_post1q = 1,
		.adpt_eq = 48,
		.ttlcr0 = 0x00000400,
	},
	[LANE_MODE_10GBASER] = {
		.proto_sel = PROTO_SEL_XFI_10GBASER_KR_SXGMII,
		.if20bit_en = 1,
		.islew_rctl = 2,
		.oslew_rctl = 2,
		.rxeq_bst = 1,
		.base_wand = 1,
		.teq_type = EQ_TYPE_2TAP,
		.sgn_post1q = 1,
		.ratio_post1q = 3,
		.adpt_eq = 48,
		.amp_red = 7,
		.ttlcr0 = 0x00000400,
	},
};

static void lynx_10g_cdr_lock_check(struct lynx_lane *lane)
{
	u32 tcsr3 = lynx_lane_read(lane, LNaTCSR3);

	if (tcsr3 & LNaTCSR3_CDR_LCK)
		return;

	dev_dbg(&lane->phy->dev,
		"Lane %c CDR unlocked, resetting receiver...\n",
		'A' + lane->id);

	lynx_lane_rmw(lane, LNaGCR0, LNaGCR0_RRST_ON, LNaGCR0_RRST);
	usleep_range(1, 2);
	lynx_lane_rmw(lane, LNaGCR0, LNaGCR0_RRST_OFF, LNaGCR0_RRST);

	usleep_range(1, 2);
}

static void lynx_10g_pll_read_configuration(struct lynx_pll *pll)
{
	u32 val;

	val = lynx_pll_read(pll, PLLnCR0);
	pll->frate_sel = FIELD_GET(PLLnCR0_FRATE_SEL, val);
	pll->refclk_sel = FIELD_GET(PLLnCR0_REFCLK_SEL, val);
	pll->enabled = !(val & PLLnCR0_POFF);
	pll->locked = !!(val & PLLnCR0_PLL_LCK);

	if (!pll->enabled)
		return;

	switch (pll->frate_sel) {
	case PLLnCR0_FRATE_5G:
		/* 5GHz clock net */
		__set_bit(LANE_MODE_1000BASEX_SGMII, pll->supported);
		__set_bit(LANE_MODE_QSGMII, pll->supported);
		break;
	case PLLnCR0_FRATE_3_125G:
		__set_bit(LANE_MODE_2500BASEX, pll->supported);
		break;
	case PLLnCR0_FRATE_5_15625G:
		/* 10.3125GHz clock net */
		__set_bit(LANE_MODE_10GBASER, pll->supported);
		__set_bit(LANE_MODE_USXGMII, pll->supported);
		__set_bit(LANE_MODE_10G_QXGMII, pll->supported);
		break;
	default:
		break;
	}
}

/* On LS1028A, SGMIIA_CFG, SGMIIB_CFG, and SGMIIC_CFG from PCCR8 have the
 * ability to map either an ENETC PCS (PCCR8_SGMIIa_CFG=2) or a Felix switch
 * PCS (PCCR8_SGMIIa_CFG=1) to the same lane.
 *
 * On LS1088A, the same QSGMII PCS B can be connected to SerDes lane 1
 * (PCCR9_QSGMIIa_CFG=1) or to lane 3 (PCCR9_QSGMIIa_CFG=2).
 *
 * The PHY API lacks the capability to distinguish anything about the consumer,
 * so we don't support changing the initial muxing done by the RCW.
 *
 * However, after disabling a PCS through PCCR8, we need to properly restore
 * the original value to keep the same muxing, and for that we need to back
 * it up (here).
 */
static void lynx_10g_backup_pccr_val(struct lynx_lane *lane)
{
	u32 val;
	int err;

	if (lane->mode == LANE_MODE_UNKNOWN)
		return;

	err = lynx_pccr_read(lane, lane->mode, &val);
	if (err) {
		dev_warn(&lane->phy->dev,
			 "The driver doesn't know how to access the PCCR for lane mode %s\n",
			 lynx_lane_mode_str(lane->mode));
		lane->mode = LANE_MODE_UNKNOWN;
		return;
	}

	lane->default_pccr[lane->mode] = val;

	/* 1000Base-X, 1000Base-KX, 2500Base-KX and SGMII use the same PCCR8.
	 * Only the KX bit differs (set for 1000Base-KX). Since we back up PCCR
	 * values per lane mode, make sure to not back up the PCCR8 value with
	 * the KX bit set for the non-KX modes, if the lane was in KX mode at
	 * boot time. Just preserve bits 2:0, which tell whether the (and
	 * which) 1G PCS was enabled.
	 */
	switch (lane->mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		lane->default_pccr[LANE_MODE_1000BASEX_SGMII] = val & ~PCCR8_SGMIIa_KX;
		lane->default_pccr[LANE_MODE_2500BASEX] = val & ~PCCR8_SGMIIa_KX;
		break;
	default:
		break;
	}
}

/* Is the PCS enabled, according to the value backed up from the PCCR register
 * for this lane mode?
 *
 * Normally we'd need to ask "what lane mode are we talking about?", but the
 * answer is invariably the same regardless - PCCR8_SGMIIa_CFG has the same
 * layout as PCCR9_QSGMIIa_CFG, PCCRB_XFIa_CFG etc etc, and the value 0
 * universally means "PCS disabled". So this is just a shorthand answer.
 */
static bool lynx_10g_pccr_val_enabled(u32 pccr)
{
	return FIELD_PREP(PCCR8_SGMIIa_CFG, pccr) != 0;
}

static bool lynx_10g_lane_is_3_125g(struct lynx_lane *lane)
{
	struct lynx_priv *priv = lane->priv;
	struct lynx_pll *pll;
	u32 gcr0;

	gcr0 = lynx_lane_read(lane, LNaGCR0);

	if (gcr0 & LNaGCR0_TPLL_PLLF)
		pll = &priv->pll[0];
	else
		pll = &priv->pll[1];

	if (pll->frate_sel != PLLnCR0_FRATE_3_125G)
		return false;

	if (FIELD_GET(LNaGCR0_TRAT_SEL, gcr0) != RAT_SEL_FULL ||
	    FIELD_GET(LNaGCR0_RRAT_SEL, gcr0) != RAT_SEL_FULL)
		return false;

	return true;
}

static void lynx_10g_lane_read_configuration(struct lynx_lane *lane)
{
	u32 pssr0 = lynx_lane_read(lane, LNaPSSR0);
	struct lynx_priv *priv = lane->priv;
	int proto;

	proto = FIELD_GET(LNaPSSR0_TYPE, pssr0);
	switch (proto) {
	case PROTO_SEL_SGMII_BASEX_KX_QSGMII:
		if (lynx_10g_lane_is_3_125g(lane))
			lane->mode = LANE_MODE_2500BASEX;
		else if (FIELD_GET(LNaPSSR0_IS_QUAD, pssr0))
			lane->mode = LANE_MODE_QSGMII;
		else
			lane->mode = LANE_MODE_1000BASEX_SGMII;
		break;
	case PROTO_SEL_XFI_10GBASER_KR_SXGMII:
		if (FIELD_GET(LNaPSSR0_IS_QUAD, pssr0))
			lane->mode = LANE_MODE_10G_QXGMII;
		else if (priv->info->quirks & LYNX_QUIRK_HAS_HARDCODED_USXGMII)
			lane->mode = LANE_MODE_USXGMII;
		else
			lane->mode = LANE_MODE_10GBASER;
		break;
	case PROTO_SEL_PCIE:
	case PROTO_SEL_SATA:
	case PROTO_SEL_XAUI:
		break;
	default:
		dev_warn(&lane->phy->dev, "Unknown lane protocol 0x%x\n",
			 proto);
	}

	lynx_10g_backup_pccr_val(lane);
}

static int ls1028a_get_pccr(enum lynx_lane_mode lane_mode, int lane,
			    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(lane);
		break;
	case LANE_MODE_QSGMII:
		if (lane != 1)
			return -EINVAL;

		pccr->offset = PCCR9;
		pccr->width = 3;
		pccr->shift = QSGMII_CFG(A);
		break;
	case LANE_MODE_10G_QXGMII:
		if (lane != 1)
			return -EINVAL;

		pccr->offset = PCCR9;
		pccr->width = 3;
		pccr->shift = QXGMII_CFG(A);
		break;
	case LANE_MODE_USXGMII:
		if (lane != 0)
			return -EINVAL;

		pccr->offset = PCCRB;
		pccr->width = 3;
		pccr->shift = SXGMII_CFG(A);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls1028a_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		return SGMIIaCR0(lane);
	case LANE_MODE_QSGMII:
		return lane == 1 ? QSGMIIaCR0(A) : -EINVAL;
	case LANE_MODE_USXGMII:
		return lane == 0 ? SXGMIIaCR0(A) : -EINVAL;
	case LANE_MODE_10G_QXGMII:
		return lane == 1 ? QXGMIIaCR0(A) : -EINVAL;
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls1028a = {
	.get_pccr = ls1028a_get_pccr,
	.get_pcvt_offset = ls1028a_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 4,
	.index = 1,
	.quirks = LYNX_QUIRK_HAS_HARDCODED_USXGMII,
};

static int ls1046a_serdes1_get_pccr(enum lynx_lane_mode lane_mode, int lane,
				    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(lane);
		break;
	case LANE_MODE_QSGMII:
		if (lane != 1)
			return -EINVAL;

		pccr->offset = PCCR9;
		pccr->width = 3;
		pccr->shift = QSGMII_CFG(B);
		break;
	case LANE_MODE_10GBASER:
		switch (lane) {
		case 2:
			pccr->shift = XFI_CFG(A);
			break;
		case 3:
			pccr->shift = XFI_CFG(B);
			break;
		default:
			return -EINVAL;
		}

		pccr->offset = PCCRB;
		pccr->width = 3;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls1046a_serdes1_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		return SGMIIaCR0(lane);
	case LANE_MODE_QSGMII:
		if (lane != 1)
			return -EINVAL;

		return QSGMIIaCR0(B);
	case LANE_MODE_10GBASER:
		switch (lane) {
		case 2:
			return XFIaCR0(A);
		case 3:
			return XFIaCR0(B);
		default:
			return -EINVAL;
		}
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls1046a_serdes1 = {
	.get_pccr = ls1046a_serdes1_get_pccr,
	.get_pcvt_offset = ls1046a_serdes1_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 4,
	.index = 1,
};

static int ls1046a_serdes2_get_pccr(enum lynx_lane_mode lane_mode, int lane,
				    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		if (lane != 1)
			return -EINVAL;

		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(B);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls1046a_serdes2_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		if (lane != 1)
			return -EINVAL;

		return SGMIIaCR0(B);
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls1046a_serdes2 = {
	.get_pccr = ls1046a_serdes2_get_pccr,
	.get_pcvt_offset = ls1046a_serdes2_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 4,
	.index = 2,
};

static int ls1088a_serdes1_get_pccr(enum lynx_lane_mode lane_mode, int lane,
				    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(lane);
		break;
	case LANE_MODE_QSGMII:
		switch (lane) {
		case 0:
			pccr->shift = QSGMII_CFG(A);
			break;
		case 1:
		case 3:
			pccr->shift = QSGMII_CFG(B);
			break;
		default:
			return -EINVAL;
		}

		pccr->offset = PCCR9;
		pccr->width = 3;
		break;
	case LANE_MODE_10GBASER:
		switch (lane) {
		case 2:
			pccr->shift = XFI_CFG(A);
			break;
		case 3:
			pccr->shift = XFI_CFG(B);
			break;
		default:
			return -EINVAL;
		}

		pccr->offset = PCCRB;
		pccr->width = 3;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls1088a_serdes1_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
		return SGMIIaCR0(lane);
	case LANE_MODE_QSGMII:
		switch (lane) {
		case 0:
			return QSGMIIaCR0(A);
		case 1:
		case 3:
			return QSGMIIaCR0(B);
		default:
			return -EINVAL;
		}
	case LANE_MODE_10GBASER:
		switch (lane) {
		case 2:
			return XFIaCR0(A);
		case 3:
			return XFIaCR0(B);
		default:
			return -EINVAL;
		}
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls1088a_serdes1 = {
	.get_pccr = ls1088a_serdes1_get_pccr,
	.get_pcvt_offset = ls1088a_serdes1_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 4,
	.index = 1,
};

static int ls2088a_serdes1_get_pccr(enum lynx_lane_mode lane_mode, int lane,
				    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(lane);
		break;
	case LANE_MODE_QSGMII:
		switch (lane) {
		case 2:
		case 6:
			pccr->shift = QSGMII_CFG(A);
			break;
		case 7:
			pccr->shift = QSGMII_CFG(B);
			break;
		case 0:
		case 4:
			pccr->shift = QSGMII_CFG(C);
			break;
		case 1:
		case 5:
			pccr->shift = QSGMII_CFG(D);
			break;
		default:
			return -EINVAL;
		}

		pccr->offset = PCCR9;
		pccr->width = 3;
		break;
	case LANE_MODE_10GBASER:
		pccr->offset = PCCRB;
		pccr->width = 3;
		pccr->shift = XFI_CFG(lane);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls2088a_serdes1_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		return SGMIIaCR0(lane);
	case LANE_MODE_QSGMII:
		switch (lane) {
		case 2:
		case 6:
			return QSGMIIaCR0(A);
		case 7:
			return QSGMIIaCR0(B);
		case 0:
		case 4:
			return QSGMIIaCR0(C);
		case 1:
		case 5:
			return QSGMIIaCR0(D);
		default:
			return -EINVAL;
		}
	case LANE_MODE_10GBASER:
		return XFIaCR0(lane);
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls2088a_serdes1 = {
	.get_pccr = ls2088a_serdes1_get_pccr,
	.get_pcvt_offset = ls2088a_serdes1_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 8,
	.index = 1,
};

static int ls2088a_serdes2_get_pccr(enum lynx_lane_mode lane_mode, int lane,
				    struct lynx_pccr *pccr)
{
	switch (lane_mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		pccr->offset = PCCR8;
		pccr->width = 4;
		pccr->shift = SGMII_CFG(lane);
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int ls2088a_serdes2_get_pcvt_offset(int lane, enum lynx_lane_mode mode)
{
	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		return SGMIIaCR0(lane);
	default:
		return -EINVAL;
	}
}

static const struct lynx_info lynx_info_ls2088a_serdes2 = {
	.get_pccr = ls2088a_serdes2_get_pccr,
	.get_pcvt_offset = ls2088a_serdes2_get_pcvt_offset,
	.pll_read_configuration = lynx_10g_pll_read_configuration,
	.lane_read_configuration = lynx_10g_lane_read_configuration,
	.cdr_lock_check = lynx_10g_cdr_lock_check,
	.num_lanes = 8,
	.index = 2,
};

/* Halting puts the lane in a mode in which it can be reconfigured */
static void lynx_10g_lane_halt(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	/* Issue a reset request */
	lynx_lane_rmw(lane, LNaGCR0,
		      LNaGCR0_RRST_ON | LNaGCR0_TRST_ON,
		      LNaGCR0_RRST | LNaGCR0_TRST);

	/* The RM says to wait for at least 50ns */
	usleep_range(1, 2);
}

static void lynx_10g_lane_reset(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	/* Finalize the reset request */
	lynx_lane_rmw(lane, LNaGCR0,
		      LNaGCR0_RRST_OFF | LNaGCR0_TRST_OFF,
		      LNaGCR0_RRST | LNaGCR0_TRST);
}

static int lynx_10g_power_off(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	if (!lane->powered_up)
		return 0;

	/* Issue a reset request with the power down bits set */
	lynx_lane_rmw(lane, LNaGCR0,
		      LNaGCR0_RRST_ON | LNaGCR0_TRST_ON |
		      LNaGCR0_RX_PD | LNaGCR0_TX_PD,
		      LNaGCR0_RRST | LNaGCR0_TRST |
		      LNaGCR0_RX_PD | LNaGCR0_TX_PD);

	/* The RM says to wait for at least 50ns */
	usleep_range(1, 2);

	lane->powered_up = false;

	return 0;
}

static int lynx_10g_power_on(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	if (lane->powered_up)
		return 0;

	/* RM says that to enable a previously powered down lane, set
	 * LNmGCR0[{R,T}X_PD]=0, wait 15 us, then set LNmGCR0[{R,T}RST]=1.
	 */
	lynx_lane_rmw(lane, LNaGCR0, 0, LNaGCR0_RX_PD | LNaGCR0_TX_PD);
	usleep_range(150, 300);
	lynx_10g_lane_reset(phy);

	lane->powered_up = true;

	return 0;
}

static void lynx_10g_lane_set_nrate(struct lynx_lane *lane,
				    struct lynx_pll *pll,
				    enum lynx_lane_mode mode)
{
	enum lynx_10g_rat_sel nrate;

	switch (pll->frate_sel) {
	case PLLnCR0_FRATE_5G:
		switch (mode) {
		case LANE_MODE_1000BASEX_SGMII:
			nrate = RAT_SEL_QUARTER;
			break;
		case LANE_MODE_QSGMII:
			nrate = RAT_SEL_FULL;
			break;
		default:
			return;
		}
		break;
	case PLLnCR0_FRATE_3_125G:
		switch (mode) {
		case LANE_MODE_2500BASEX:
			nrate = RAT_SEL_FULL;
			break;
		default:
			return;
		}
		break;
	case PLLnCR0_FRATE_5_15625G:
		switch (mode) {
		case LANE_MODE_10GBASER:
		case LANE_MODE_USXGMII:
		case LANE_MODE_10G_QXGMII:
			nrate = RAT_SEL_DOUBLE;
			break;
		default:
			return;
		}
		break;
	default:
		return;
	}

	lynx_lane_rmw(lane, LNaGCR0,
		      FIELD_PREP(LNaGCR0_TRAT_SEL, nrate) |
		      FIELD_PREP(LNaGCR0_RRAT_SEL, nrate),
		      LNaGCR0_RRAT_SEL | LNaGCR0_TRAT_SEL);
}

static void lynx_10g_lane_set_pll(struct lynx_lane *lane,
				  struct lynx_pll *pll)
{
	if (pll->id == 0) {
		lynx_lane_rmw(lane, LNaGCR0,
			      LNaGCR0_RPLL_PLLF | LNaGCR0_TPLL_PLLF,
			      LNaGCR0_RPLL_MSK | LNaGCR0_TPLL_MSK);
	} else {
		lynx_lane_rmw(lane, LNaGCR0,
			      LNaGCR0_RPLL_PLLS | LNaGCR0_TPLL_PLLS,
			      LNaGCR0_RPLL_MSK | LNaGCR0_TPLL_MSK);
	}
}

static void lynx_10g_lane_remap_pll(struct lynx_lane *lane,
				    enum lynx_lane_mode lane_mode)
{
	struct lynx_priv *priv = lane->priv;
	struct lynx_pll *pll;

	/* Switch to the PLL that works with this interface type */
	pll = lynx_pll_get(priv, lane_mode);
	if (unlikely(!pll))
		return;

	lynx_10g_lane_set_pll(lane, pll);

	/* Choose the portion of clock net to be used on this lane */
	lynx_10g_lane_set_nrate(lane, pll, lane_mode);
}

static void lynx_10g_lane_change_proto_conf(struct lynx_lane *lane,
					    enum lynx_lane_mode mode)
{
	const struct lynx_10g_proto_conf *conf = &lynx_10g_proto_conf[mode];

	lynx_lane_rmw(lane, LNaGCR0,
		      FIELD_PREP(LNaGCR0_PROTS, conf->proto_sel) |
		      FIELD_PREP(LNaGCR0_IF20BIT_EN, conf->if20bit_en),
		      LNaGCR0_PROTS | LNaGCR0_IF20BIT_EN);
	lynx_lane_rmw(lane, LNaGCR1,
		      FIELD_PREP(LNaGCR1_REIDL_TH, conf->reidl_th) |
		      FIELD_PREP(LNaGCR1_REIDL_ET_MSB, conf->reidl_et_msb) |
		      FIELD_PREP(LNaGCR1_REIDL_ET_SEL, conf->reidl_et_sel) |
		      FIELD_PREP(LNaGCR1_REIDL_EX_MSB, conf->reidl_ex_msb) |
		      FIELD_PREP(LNaGCR1_REIDL_EX_SEL, conf->reidl_ex_sel) |
		      FIELD_PREP(LNaGCR1_ISLEW_RCTL, conf->islew_rctl) |
		      FIELD_PREP(LNaGCR1_OSLEW_RCTL, conf->oslew_rctl),
		      LNaGCR1_REIDL_TH |
		      LNaGCR1_REIDL_ET_MSB | LNaGCR1_REIDL_ET_SEL |
		      LNaGCR1_REIDL_EX_MSB | LNaGCR1_REIDL_EX_SEL |
		      LNaGCR1_ISLEW_RCTL | LNaGCR1_OSLEW_RCTL);
	lynx_lane_rmw(lane, LNaRECR0,
		      FIELD_PREP(LNaRECR0_RXEQ_BST, conf->rxeq_bst) |
		      FIELD_PREP(LNaRECR0_GK2OVD, conf->gk2ovd) |
		      FIELD_PREP(LNaRECR0_GK3OVD, conf->gk3ovd) |
		      FIELD_PREP(LNaRECR0_GK2OVD_EN, conf->gk2ovd_en) |
		      FIELD_PREP(LNaRECR0_GK3OVD_EN, conf->gk3ovd_en) |
		      FIELD_PREP(LNaRECR0_BASE_WAND, conf->base_wand),
		      LNaRECR0_RXEQ_BST | LNaRECR0_GK2OVD | LNaRECR0_GK3OVD |
		      LNaRECR0_GK2OVD_EN | LNaRECR0_GK3OVD_EN |
		      LNaRECR0_BASE_WAND);
	lynx_lane_rmw(lane, LNaTECR0,
		      FIELD_PREP(LNaTECR0_TEQ_TYPE, conf->teq_type) |
		      FIELD_PREP(LNaTECR0_SGN_PREQ, conf->sgn_preq) |
		      FIELD_PREP(LNaTECR0_RATIO_PREQ, conf->ratio_preq) |
		      FIELD_PREP(LNaTECR0_SGN_POST1Q, conf->sgn_post1q) |
		      FIELD_PREP(LNaTECR0_RATIO_PST1Q, conf->ratio_post1q) |
		      FIELD_PREP(LNaTECR0_ADPT_EQ, conf->adpt_eq) |
		      FIELD_PREP(LNaTECR0_AMP_RED, conf->amp_red),
		      LNaTECR0_TEQ_TYPE | LNaTECR0_SGN_PREQ |
		      LNaTECR0_RATIO_PREQ | LNaTECR0_SGN_POST1Q |
		      LNaTECR0_RATIO_PST1Q | LNaTECR0_ADPT_EQ |
		      LNaTECR0_AMP_RED);
	lynx_lane_write(lane, LNaTTLCR0, conf->ttlcr0);
}

static int lynx_10g_lane_disable_pcvt(struct lynx_lane *lane,
				      enum lynx_lane_mode mode)
{
	struct lynx_priv *priv = lane->priv;
	int err;

	spin_lock(&priv->pcc_lock);

	err = lynx_pccr_write(lane, mode, 0);
	if (err)
		goto out;

	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		err = lynx_pcvt_rmw(lane, mode, CR(1), SGMIIaCR1_SGPCS_DIS,
				    SGMIIaCR1_SGPCS_EN);
		if (err)
			goto out;

		lynx_pcvt_rmw(lane, mode, CR(0),
			      SGMIIaCR0_RST_SGM_ON | SGMIIaCR0_PD_SGM,
			      SGMIIaCR0_RST_SGM | SGMIIaCR0_PD_SGM);
		break;
	case LANE_MODE_QSGMII:
		err = lynx_pcvt_rmw(lane, mode, CR(0),
				    QSGMIIaCR0_RST_QSGM_ON | QSGMIIaCR0_PD_QSGM,
				    QSGMIIaCR0_RST_QSGM | QSGMIIaCR0_PD_QSGM);
		if (err)
			goto out;
		break;
	default:
		err = 0;
	}

out:
	spin_unlock(&priv->pcc_lock);

	return err;
}

static int lynx_10g_lane_enable_pcvt(struct lynx_lane *lane,
				     enum lynx_lane_mode mode)
{
	struct lynx_priv *priv = lane->priv;
	u32 val;
	int err;

	spin_lock(&priv->pcc_lock);

	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		err = lynx_pcvt_rmw(lane, mode, CR(1), SGMIIaCR1_SGPCS_EN,
				    SGMIIaCR1_SGPCS_EN);
		if (err)
			goto out;

		lynx_pcvt_rmw(lane, mode, CR(0), SGMIIaCR0_RST_SGM_OFF,
			      SGMIIaCR0_RST_SGM | SGMIIaCR0_PD_SGM);
		break;
	case LANE_MODE_QSGMII:
		err = lynx_pcvt_rmw(lane, mode, CR(0), QSGMIIaCR0_RST_QSGM_OFF,
				    QSGMIIaCR0_RST_QSGM | QSGMIIaCR0_PD_QSGM);
		if (err)
			goto out;
		break;
	default:
		err = 0;
	}

	/* If the PCS was enabled at boot time, use the backed up PCCR value to
	 * re-enable it here, to preserve the muxing.
	 */
	if (lynx_10g_pccr_val_enabled(lane->default_pccr[mode])) {
		err = lynx_pccr_write(lane, mode, lane->default_pccr[mode]);
		goto out;
	}

	/* If the PCS was not enabled, set the PCCR to a default value which
	 * enables it (1). The assumption is that this is the only PCS <->
	 * SerDes lane muxing value possible.
	 *
	 * This is mostly useful for SGMII <-> 10GBase-R major protocol
	 * reconfiguration, where at boot time, either the SGMII or the
	 * 10GBase-R PCS is enabled for the lane, but not both.
	 *
	 * In fact, if there are multiple lane muxing options, this function
	 * will most likely not choose the right one. For correct functionality
	 * there, we assume that the PCS we are enabling here was found enabled
	 * at boot time (reset default, or through PBL, or...), and we preserve
	 * its muxing through the default_pccr branch above.
	 */
	val = 0;

	switch (mode) {
	case LANE_MODE_1000BASEX_SGMII:
	case LANE_MODE_2500BASEX:
		val |= FIELD_PREP(PCCR8_SGMIIa_CFG, 1);
		break;
	case LANE_MODE_QSGMII:
		val |= FIELD_PREP(PCCR9_QSGMIIa_CFG, 1);
		break;
	case LANE_MODE_10G_QXGMII:
		val |= FIELD_PREP(PCCR9_QXGMIIa_CFG, 1);
		break;
	case LANE_MODE_10GBASER:
		val |= FIELD_PREP(PCCRB_XFIa_CFG, 1);
		break;
	case LANE_MODE_USXGMII:
		val |= FIELD_PREP(PCCRB_SXGMIIa_CFG, 1);
		break;
	default:
		err = 0;
		goto out;
	}

	err = lynx_pccr_write(lane, mode, val);
out:
	spin_unlock(&priv->pcc_lock);

	return err;
}

static bool lynx_10g_lane_mode_needs_rcw_override(struct lynx_lane *lane,
						  enum lynx_lane_mode new)
{
	enum lynx_lane_mode curr = lane->mode;

	/* Major protocol changes, which involve changing the PCS connection to
	 * the GMII MAC with the one to the XGMII MAC, require an RCW override
	 * procedure to reconfigure an internal mux, as documented here:
	 * https://lore.kernel.org/linux-phy/20230810102631.bvozjer3t67r67iy@skbuf/
	 * This is SoC-specific, and not yet implemented in drivers/soc/fsl/guts.c.
	 *
	 * So the supported set of protocols depends on the initial lane mode.
	 *
	 * Minor protocol changes (SGMII <-> 1000Base-X <-> 2500Base-X or
	 * 10GBase-R <-> USXGMII) are supported.
	 */
	if ((lynx_lane_mode_uses_gmii_mac(curr) &&
	     lynx_lane_mode_uses_xgmii_mac(new)) ||
	    (lynx_lane_mode_uses_xgmii_mac(curr) &&
	     lynx_lane_mode_uses_gmii_mac(new)))
		return true;

	return false;
}

static int lynx_10g_validate(struct phy *phy, enum phy_mode mode, int submode,
			     union phy_configure_opts *opts)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);
	enum lynx_lane_mode lane_mode;
	int err;

	err = lynx_phy_mode_to_lane_mode(phy, mode, submode, &lane_mode);
	if (err)
		return err;

	if (lynx_10g_lane_mode_needs_rcw_override(lane, lane_mode))
		return -EINVAL;

	return 0;
}

static int lynx_10g_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);
	bool powered_up = lane->powered_up;
	enum lynx_lane_mode lane_mode;
	int err;

	err = lynx_10g_validate(phy, mode, submode, NULL);
	if (err)
		return err;

	lane_mode = phy_interface_to_lane_mode(submode);
	/* lynx_10g_validate() already made sure the lane_mode is supported */

	if (lane_mode == lane->mode)
		return 0;

	/* If the lane is powered up, put the lane into the halt state while
	 * the reconfiguration is being done.
	 */
	if (powered_up)
		lynx_10g_lane_halt(phy);

	err = lynx_10g_lane_disable_pcvt(lane, lane->mode);
	if (err)
		goto out;

	lynx_10g_lane_change_proto_conf(lane, lane_mode);
	lynx_10g_lane_remap_pll(lane, lane_mode);
	WARN_ON(lynx_10g_lane_enable_pcvt(lane, lane_mode));

	lane->mode = lane_mode;

out:
	if (powered_up) {
		/* The RM says to wait for at least 120 ns */
		usleep_range(1, 2);
		lynx_10g_lane_reset(phy);
	}

	return err;
}

static int lynx_10g_init(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	/* Mark the fact that the lane was init */
	lane->init = true;

	/* SerDes lanes are powered on at boot time. Any lane that is
	 * managed by this driver will get powered off when its consumer
	 * calls phy_init().
	 */
	lane->powered_up = true;
	lynx_10g_power_off(phy);

	return 0;
}

static int lynx_10g_exit(struct phy *phy)
{
	struct lynx_lane *lane = phy_get_drvdata(phy);

	/* The lane returns to the state where it isn't managed by the
	 * consumer, so we must treat is as if it isn't initialized, and always
	 * powered on.
	 */
	lane->init = false;
	lane->powered_up = false;
	lynx_10g_power_on(phy);

	return 0;
}

static const struct phy_ops lynx_10g_ops = {
	.init		= lynx_10g_init,
	.exit		= lynx_10g_exit,
	.power_on	= lynx_10g_power_on,
	.power_off	= lynx_10g_power_off,
	.set_mode	= lynx_10g_set_mode,
	.validate	= lynx_10g_validate,
	.owner		= THIS_MODULE,
};

static int lynx_10g_probe(struct platform_device *pdev)
{
	return lynx_probe(pdev, of_device_get_match_data(&pdev->dev),
			  &lynx_10g_ops);
}

static const struct of_device_id lynx_10g_of_match_table[] = {
	{ .compatible = "fsl,ls1028a-serdes", .data = &lynx_info_ls1028a },
	{ .compatible = "fsl,ls1046a-serdes1", .data = &lynx_info_ls1046a_serdes1 },
	{ .compatible = "fsl,ls1046a-serdes2", .data = &lynx_info_ls1046a_serdes2 },
	{ .compatible = "fsl,ls1088a-serdes1", .data = &lynx_info_ls1088a_serdes1 },
	{ .compatible = "fsl,ls2088a-serdes1", .data = &lynx_info_ls2088a_serdes1 },
	{ .compatible = "fsl,ls2088a-serdes2", .data = &lynx_info_ls2088a_serdes2 },
	{}
};
MODULE_DEVICE_TABLE(of, lynx_10g_of_match_table);

static struct platform_driver lynx_10g_driver = {
	.probe	= lynx_10g_probe,
	.remove	= lynx_remove,
	.driver	= {
		.name = "lynx-10g",
		.of_match_table = lynx_10g_of_match_table,
	},
};
module_platform_driver(lynx_10g_driver);

MODULE_IMPORT_NS("PHY_FSL_LYNX");
MODULE_AUTHOR("Ioana Ciornei <ioana.ciornei@nxp.com>");
MODULE_AUTHOR("Vladimir Oltean <vladimir.oltean@nxp.com>");
MODULE_DESCRIPTION("Lynx 10G SerDes PHY driver for Layerscape SoCs");
MODULE_LICENSE("GPL");