Contributors: 6
Author Tokens Token Proportion Commits Commit Proportion
Herve Codina 3773 85.95% 13 61.90%
Jerome Brunet 554 12.62% 4 19.05%
Vasily Khoruzhick 34 0.77% 1 4.76%
Kuninori Morimoto 26 0.59% 1 4.76%
Mylène Josserand 2 0.05% 1 4.76%
Thomas Gleixner 1 0.02% 1 4.76%
Total 4390 21 


// SPDX-License-Identifier: GPL-2.0-only
/*
 * Support for gpio amplifier
 *   Copyright 2026 CS GROUP France
 *   Author: Herve Codina <herve.codina@bootlin.com>
 *
 * Basic simple amplifier driver
 *   Copyright (c) 2017 BayLibre, SAS.
 *   Author: Jerome Brunet <jbrunet@baylibre.com>
 */

#include <linux/bitmap.h>
#include <linux/bits.h>
#include <linux/gpio/consumer.h>
#include <linux/math.h>
#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/soc.h>
#include <linux/sort.h>
#include <sound/tlv.h>

struct simple_amp_single {
	struct gpio_desc *gpio;
	bool is_inverted;
	int kctrl_val;
	const char *control_name;
};

struct simple_amp_point {
	u32 gpio_val;
	int gain_db;
};

struct simple_amp_range {
	unsigned int nb_points;
	struct simple_amp_point min;
	struct simple_amp_point max;
};

struct simple_amp_ranges {
	unsigned int nb_ranges;
	struct simple_amp_range *tab_ranges;
};

struct simple_amp_labels {
	unsigned int nb_labels;
	const char **tab_labels;
};

enum simple_amp_mode {
	SIMPLE_AMP_MODE_NONE,
	SIMPLE_AMP_MODE_RANGES,
	SIMPLE_AMP_MODE_LABELS,
};

struct simple_amp_multi {
	struct gpio_descs *gpios;
	u32 kctrl_val;
	u32 kctrl_max;
	const char *control_name;
	unsigned int *tlv_array;
	enum simple_amp_mode mode;
	union {
		struct simple_amp_ranges ranges;
		struct simple_amp_labels labels;
	};
};

struct simple_amp_data {
	unsigned int supports;
#define SIMPLE_AUDIO_SUPPORT_PGA		BIT(0)
#define SIMPLE_AUDIO_SUPPORT_POWER_SUPPLIES	BIT(1)
#define SIMPLE_AUDIO_SUPPORT_MUTE		BIT(2)
#define SIMPLE_AUDIO_SUPPORT_BYPASS		BIT(3)

	const struct snd_soc_dapm_widget *dapm_widgets;
	unsigned int num_dapm_widgets;
	const struct snd_soc_dapm_route *dapm_routes;
	unsigned int num_dapm_routes;
};

struct simple_amp {
	const struct simple_amp_data *data;
	struct gpio_desc *gpiod_enable;
	struct simple_amp_single mute;
	struct simple_amp_single bypass;
	struct simple_amp_multi gain;
};

static int simple_amp_power_event(struct snd_soc_dapm_widget *w,
				  struct snd_kcontrol *control, int event)
{
	struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(c);
	int val;

	switch (event) {
	case SND_SOC_DAPM_POST_PMU:
		val = 1;
		break;
	case SND_SOC_DAPM_PRE_PMD:
		val = 0;
		break;
	default:
		WARN(1, "Unexpected event");
		return -EINVAL;
	}

	gpiod_set_value_cansleep(simple_amp->gpiod_enable, val);

	return 0;
}

static const struct snd_soc_dapm_widget simple_amp_dapm_widgets[] = {
	SND_SOC_DAPM_INPUT("INL"),
	SND_SOC_DAPM_INPUT("INR"),
	SND_SOC_DAPM_OUT_DRV_E("DRV", SND_SOC_NOPM, 0, 0, NULL, 0, simple_amp_power_event,
			       (SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)),
	SND_SOC_DAPM_OUTPUT("OUTL"),
	SND_SOC_DAPM_OUTPUT("OUTR"),
	SND_SOC_DAPM_REGULATOR_SUPPLY("VCC", 20, 0),
};

static const struct snd_soc_dapm_route simple_amp_dapm_routes[] = {
	{ "DRV", NULL, "INL" },
	{ "DRV", NULL, "INR" },
	{ "OUTL", NULL, "VCC" },
	{ "OUTR", NULL, "VCC" },
	{ "OUTL", NULL, "DRV" },
	{ "OUTR", NULL, "DRV" },
};

static const struct snd_soc_dapm_widget simple_amp_mono_pga_dapm_widgets[] = {
	SND_SOC_DAPM_INPUT("IN"),
	SND_SOC_DAPM_OUTPUT("OUT"),
	SND_SOC_DAPM_PGA_E("PGA", SND_SOC_NOPM, 0, 0, NULL, 0, simple_amp_power_event,
			   (SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)),
	SND_SOC_DAPM_REGULATOR_SUPPLY("vdd", 0, 0),
};

static const struct snd_soc_dapm_route simple_amp_mono_pga_dapm_routes[] = {
	{ "PGA", NULL, "IN" },
	{ "PGA", NULL, "vdd" },
	{ "OUT", NULL, "PGA" },
};

static const struct snd_soc_dapm_widget simple_amp_stereo_pga_dapm_widgets[] = {
	SND_SOC_DAPM_INPUT("INL"),
	SND_SOC_DAPM_INPUT("INR"),
	SND_SOC_DAPM_OUTPUT("OUTL"),
	SND_SOC_DAPM_OUTPUT("OUTR"),
	SND_SOC_DAPM_PGA_E("PGA", SND_SOC_NOPM, 0, 0, NULL, 0, simple_amp_power_event,
			   (SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)),
	SND_SOC_DAPM_REGULATOR_SUPPLY("vdd", 0, 0),
};

static const struct snd_soc_dapm_route simple_amp_stereo_pga_dapm_routes[] = {
	{ "PGA", NULL, "INL" },
	{ "PGA", NULL, "INR" },
	{ "PGA", NULL, "vdd" },
	{ "OUTL", NULL, "PGA" },
	{ "OUTR", NULL, "PGA" },
};

static int simple_amp_single_kctrl_write_gpio(struct simple_amp_single *single,
					      int kctrl_val)
{
	int gpio_val;

	gpio_val = single->is_inverted ? !kctrl_val : kctrl_val;

	return gpiod_set_value_cansleep(single->gpio, gpio_val);
}

static int simple_amp_single_kctrl_info(struct snd_kcontrol *kcontrol,
					struct snd_ctl_elem_info *uinfo)
{
	uinfo->count = 1;
	uinfo->value.integer.min = 0;
	uinfo->value.integer.max = 1;
	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
	return 0;
}

static int simple_amp_single_kctrl_get(struct snd_kcontrol *kcontrol,
				       struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_single *single = (struct simple_amp_single *)kcontrol->private_value;

	ucontrol->value.integer.value[0] = single->kctrl_val;

	return 0;
}

static int simple_amp_single_kctrl_put(struct snd_kcontrol *kcontrol,
				       struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_single *single = (struct simple_amp_single *)kcontrol->private_value;
	int kctrl_val;
	int err;

	kctrl_val = ucontrol->value.integer.value[0] ? 1 : 0;

	if (kctrl_val == single->kctrl_val)
		return 0;

	err = simple_amp_single_kctrl_write_gpio(single, kctrl_val);
	if (err)
		return err;

	single->kctrl_val = kctrl_val;

	return 1; /* The value changed */
}

static int simple_amp_single_add_kcontrol(struct snd_soc_component *component,
					  struct simple_amp_single *single)
{
	struct snd_kcontrol_new control = {
		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
		.name = single->control_name,
		.info = simple_amp_single_kctrl_info,
		.get = simple_amp_single_kctrl_get,
		.put = simple_amp_single_kctrl_put,
		.private_value = (unsigned long)single,
	};
	int ret;

	/* Be consistent between single->kctrl_val value and the GPIO value */
	ret = simple_amp_single_kctrl_write_gpio(single, single->kctrl_val);
	if (ret)
		return ret;

	return snd_soc_add_component_controls(component, &control, 1);
}

static u32 simple_amp_multi_ranges_kctrl_to_gpio(u32 kctrl_val,
						 struct simple_amp_ranges *ranges)
{
	struct simple_amp_range *range;
	u32 index = kctrl_val;
	unsigned int i;

	for (i = 0; i < ranges->nb_ranges; i++) {
		range = &ranges->tab_ranges[i];

		if (index < range->nb_points)
			return (range->max.gpio_val >= range->min.gpio_val) ?
				range->min.gpio_val + index :
				range->min.gpio_val - index;

		index -= range->nb_points;
	}

	/*
	 * Given index out of possible ranges. This is shouldn't happen.
	 * Signal the issue and return the maximum value
	 */
	WARN(1, "kctrl_val %u out of ranges\n", kctrl_val);
	return ranges->tab_ranges[ranges->nb_ranges - 1].max.gpio_val;
}

static int simple_amp_multi_kctrl_write_gpios(struct simple_amp_multi *multi,
					      u32 kctrl_val)
{
	DECLARE_BITMAP(bm, 32);
	u32 gpio_val;

	if (kctrl_val > multi->kctrl_max)
		return -EINVAL;

	if (multi->mode == SIMPLE_AMP_MODE_RANGES)
		gpio_val = simple_amp_multi_ranges_kctrl_to_gpio(kctrl_val,
								 &multi->ranges);
	else
		gpio_val = kctrl_val;

	bitmap_from_arr32(bm, &gpio_val, multi->gpios->ndescs);

	return gpiod_multi_set_value_cansleep(multi->gpios, bm);
}

static int simple_amp_multi_kctrl_int_info(struct snd_kcontrol *kcontrol,
					   struct snd_ctl_elem_info *uinfo)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;

	uinfo->count = 1;
	uinfo->value.integer.min = 0;
	uinfo->value.integer.max = multi->kctrl_max;
	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
	return 0;
}

static int simple_amp_multi_kctrl_int_get(struct snd_kcontrol *kcontrol,
					  struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;

	ucontrol->value.integer.value[0] = multi->kctrl_val;
	return 0;
}

static int simple_amp_multi_kctrl_int_put(struct snd_kcontrol *kcontrol,
					  struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;
	u32 kctrl_val;
	int ret;

	kctrl_val = ucontrol->value.integer.value[0];

	if (kctrl_val == multi->kctrl_val)
		return 0;

	ret = simple_amp_multi_kctrl_write_gpios(multi, kctrl_val);
	if (ret)
		return ret;

	multi->kctrl_val = kctrl_val;

	return 1; /* The value changed */
}

static int simple_amp_multi_kctrl_enum_info(struct snd_kcontrol *kcontrol,
					    struct snd_ctl_elem_info *uinfo)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;

	return snd_ctl_enum_info(uinfo, 1, multi->labels.nb_labels,
				 multi->labels.tab_labels);
}

static int simple_amp_multi_kctrl_enum_get(struct snd_kcontrol *kcontrol,
					   struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;

	ucontrol->value.enumerated.item[0] = multi->kctrl_val;
	return 0;
}

static int simple_amp_multi_kctrl_enum_put(struct snd_kcontrol *kcontrol,
					   struct snd_ctl_elem_value *ucontrol)
{
	struct simple_amp_multi *multi = (struct simple_amp_multi *)kcontrol->private_value;
	u32 kctrl_val;
	int ret;

	kctrl_val = ucontrol->value.enumerated.item[0];

	if (kctrl_val == multi->kctrl_val)
		return 0;

	ret = simple_amp_multi_kctrl_write_gpios(multi, kctrl_val);
	if (ret)
		return ret;

	multi->kctrl_val = kctrl_val;

	return 1; /* The value changed */
}

static unsigned int *simple_amp_alloc_tlv_ranges(const struct simple_amp_ranges *ranges)
{
	unsigned int index;
	unsigned int *tlv;
	unsigned int *t;
	unsigned int i;

	tlv = kzalloc_objs(*tlv, 2 + ranges->nb_ranges * 6, GFP_KERNEL);
	if (!tlv)
		return NULL;

	t = tlv;

	/* Fill first TLV */
	*t++ = SNDRV_CTL_TLVT_DB_RANGE; /* Tag */
	*t++ = ranges->nb_ranges * 6 * sizeof(*tlv); /* Len */
	/* Ranges are sorted from lower to higher value */
	index = 0;
	for (i = 0; i < ranges->nb_ranges; i++) {
		/* Fill range item i */
		*t++ = index;  /* min */
		index += ranges->tab_ranges[i].nb_points;
		*t++ = index - 1;  /* max */
		*t++ = SNDRV_CTL_TLVT_DB_MINMAX; /* Tag */
		*t++ = 2 * sizeof(*tlv); /* Len */
		*t++ = ranges->tab_ranges[i].min.gain_db; /* min_dB */
		*t++ = ranges->tab_ranges[i].max.gain_db; /* max_dB */
	}

	return tlv;
}

static int simple_amp_multi_add_kcontrol(struct snd_soc_component *component,
					 struct simple_amp_multi *multi)
{
	struct snd_kcontrol_new control = {
		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
		.name = multi->control_name,
		.info = simple_amp_multi_kctrl_int_info,
		.get = simple_amp_multi_kctrl_int_get,
		.put = simple_amp_multi_kctrl_int_put,
		.private_value = (unsigned long)multi,
	};
	int ret;

	switch (multi->mode) {
	case SIMPLE_AMP_MODE_RANGES:
		multi->tlv_array = simple_amp_alloc_tlv_ranges(&multi->ranges);
		if (!multi->tlv_array)
			return -ENOMEM;

		control.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
				 SNDRV_CTL_ELEM_ACCESS_READWRITE;
		control.tlv.p = multi->tlv_array;
		break;

	case SIMPLE_AMP_MODE_LABELS:
		/* Use enumerated values */
		control.info = simple_amp_multi_kctrl_enum_info;
		control.get = simple_amp_multi_kctrl_enum_get;
		control.put = simple_amp_multi_kctrl_enum_put;
		break;

	case SIMPLE_AMP_MODE_NONE:
		/* Already set control configuration is enough */
		break;

	default:
		return -EINVAL;
	}

	/* Be consistent between multi->kctrl_val value and the GPIOs value */
	ret = simple_amp_multi_kctrl_write_gpios(multi, multi->kctrl_val);
	if (ret)
		goto err_free_tlv_array;

	ret = snd_soc_add_component_controls(component, &control, 1);
	if (ret)
		goto err_free_tlv_array;

	return 0;

err_free_tlv_array:
	kfree(multi->tlv_array);
	return ret;
}

static int simple_amp_add_basic_dapm(struct snd_soc_component *component)
{
	struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(component);
	struct device *dev = component->dev;
	int ret;

	/* Add basic dapm widgets and routes */
	ret = snd_soc_dapm_new_controls(dapm, simple_amp->data->dapm_widgets,
					simple_amp->data->num_dapm_widgets);
	if (ret) {
		dev_err(dev, "Failed to add basic dapm widgets (%d)\n", ret);
		return ret;
	}

	ret = snd_soc_dapm_add_routes(dapm, simple_amp->data->dapm_routes,
				      simple_amp->data->num_dapm_routes);
	if (ret) {
		dev_err(dev, "Failed to add basic dapm routes (%d)\n", ret);
		return ret;
	}

	return 0;
}

struct simple_amp_supply {
	const char *prop_name;
	const struct snd_soc_dapm_widget dapm_widget;
	const struct snd_soc_dapm_route dapm_route;
};

static const struct simple_amp_supply simple_amp_supplies[] = {
	{
		.prop_name = "vddio-supply",
		.dapm_widget = SND_SOC_DAPM_REGULATOR_SUPPLY("vddio", 0, 0),
		.dapm_route = { "PGA", NULL, "vddio" },
	}, {
		.prop_name = "vdda1-supply",
		.dapm_widget = SND_SOC_DAPM_REGULATOR_SUPPLY("vdda1", 0, 0),
		.dapm_route = { "PGA", NULL, "vdda1" },
	}, {
		.prop_name = "vdda2-supply",
		.dapm_widget = SND_SOC_DAPM_REGULATOR_SUPPLY("vdda2", 0, 0),
		.dapm_route = { "PGA", NULL, "vdda2" },
	},
	{ /* End of list */}
};

static int simple_amp_add_power_supplies(struct snd_soc_component *component)
{
	struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component);
	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(component);
	const struct simple_amp_supply *supply;
	struct device *dev = component->dev;
	int ret;

	/*
	 * Those additional power supplies are attached to the PGA.
	 * If PGA is not supported, simply skipped them.
	 */
	if (!(simple_amp->data->supports & SIMPLE_AUDIO_SUPPORT_PGA)) {
		dev_err(dev, "Extra power supplied need PGA\n");
		return -EINVAL;
	}

	supply = simple_amp_supplies;
	do {
		if (!of_property_present(dev->of_node, supply->prop_name))
			continue;

		ret = snd_soc_dapm_new_controls(dapm, &supply->dapm_widget, 1);
		if (ret) {
			dev_err(dev, "Failed to add control for '%s' (%d)\n",
				supply->prop_name, ret);
			return ret;
		}
		ret = snd_soc_dapm_add_routes(dapm, &supply->dapm_route, 1);
		if (ret) {
			dev_err(dev, "Failed to add route for '%s' (%d)\n",
				supply->prop_name, ret);
			return ret;
		}
	} while ((++supply)->prop_name);

	return 0;
}

static int simple_amp_component_probe(struct snd_soc_component *component)
{
	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(component);
	int ret;

	/* Add basic dapm widgets and routes */
	ret = simple_amp_add_basic_dapm(component);
	if (ret)
		return ret;

	/* Add additional power supplies */
	if (simple_amp->data->supports & SIMPLE_AUDIO_SUPPORT_POWER_SUPPLIES) {
		ret = simple_amp_add_power_supplies(component);
		if (ret)
			return ret;
	}

	if (simple_amp->mute.gpio) {
		/*
		 * The name of the GPIO used is mute. According to this name, 1
		 * means muted and 0 means un-muted.
		 *
		 * An inversion is expected by ALSA. Indeed from ALSA point of
		 * view, 1 means 'on' (un-muted) and 0 means 'off' (muted).
		 */
		simple_amp->mute.is_inverted = true;
		simple_amp->mute.kctrl_val = 1; /* Un-muted */
		ret = simple_amp_single_add_kcontrol(component, &simple_amp->mute);
		if (ret)
			return ret;
	}

	if (simple_amp->bypass.gpio) {
		ret = simple_amp_single_add_kcontrol(component, &simple_amp->bypass);
		if (ret)
			return ret;
	}

	if (simple_amp->gain.gpios) {
		ret = simple_amp_multi_add_kcontrol(component, &simple_amp->gain);
		if (ret)
			return ret;
	}

	return 0;
}

static void simple_amp_component_remove(struct snd_soc_component *component)
{
	struct simple_amp *simple_amp = snd_soc_component_get_drvdata(component);

	kfree(simple_amp->gain.tlv_array);
	simple_amp->gain.tlv_array = NULL;
}

static const struct snd_soc_component_driver simple_amp_component_driver = {
	.probe = simple_amp_component_probe,
	.remove = simple_amp_component_remove,
};

static int simple_amp_parse_single_gpio(struct device *dev,
					struct simple_amp_single *single,
					const char *gpio_property)
{
	/* Start with the inactive value */
	single->is_inverted = false;
	single->kctrl_val = 0;
	single->gpio = devm_gpiod_get_optional(dev, gpio_property, GPIOD_OUT_LOW);
	if (IS_ERR(single->gpio))
		return dev_err_probe(dev, PTR_ERR(single->gpio),
				     "Failed to get '%s' gpio\n",
				     gpio_property);
	return 0;
}

static int simple_amp_cmp_ranges(const void *a, const void *b)
{
	const struct simple_amp_range *a_range = a;
	const struct simple_amp_range *b_range = b;

	/* Ranges a and b don't overlap. This has been already checked */

	return a_range->min.gain_db - b_range->max.gain_db;
}

static int simple_amp_check_new_range(const struct simple_amp_range *new_range,
				      const struct simple_amp_range *tab_ranges,
				      unsigned int nb_ranges)
{
	unsigned int i;

	for (i = 0; i < nb_ranges; i++) {
		/* Check for range overlaps */
		if (new_range->min.gain_db >= tab_ranges[i].min.gain_db &&
		    new_range->min.gain_db <= tab_ranges[i].max.gain_db)
			return -EINVAL;

		if (new_range->max.gain_db >= tab_ranges[i].min.gain_db &&
		    new_range->max.gain_db <= tab_ranges[i].max.gain_db)
			return -EINVAL;

		if (new_range->min.gain_db <= tab_ranges[i].min.gain_db &&
		    new_range->max.gain_db >= tab_ranges[i].max.gain_db)
			return -EINVAL;
	}
	return 0;
}

static int simple_amp_parse_ranges(struct device *dev,
				   struct simple_amp_multi *multi,
				   const char *ranges_property)
{
	struct simple_amp_ranges *ranges = &multi->ranges;
	struct simple_amp_range *range;
	struct device_node *np = dev->of_node;
	struct simple_amp_point first_point;
	unsigned int max_gpio_val;
	unsigned int i;
	int ret;
	u32 u;
	s32 s;

	max_gpio_val = (1 << multi->gpios->ndescs) - 1;

	ret = of_property_count_u32_elems(np, ranges_property);
	if (ret < 0)
		return ret;

	/* The ranges array cannot be empty */
	if (ret == 0)
		return -EINVAL;
	/*
	 * One range item is composed of 2 points and each point is composed of
	 * 2 values.
	 */
	if (ret % 4)
		return -EINVAL;

	ranges->nb_ranges = ret / 4;

	/* The worst case is one range per possible gpio value */
	if (ranges->nb_ranges > max_gpio_val + 1)
		return -EINVAL;

	ranges->tab_ranges = devm_kcalloc(dev, ranges->nb_ranges,
					  sizeof(*ranges->tab_ranges),
					  GFP_KERNEL);
	if (!ranges->tab_ranges)
		return -ENOMEM;

	multi->kctrl_max = 0;
	for (i = 0; i < ranges->nb_ranges; i++) {
		range = &ranges->tab_ranges[i];

		/* First gpios value */
		ret = of_property_read_u32_index(np, ranges_property, i * 4, &u);
		if (ret)
			return ret;
		if (u > max_gpio_val)
			return -EINVAL;

		range->min.gpio_val = u;

		/* First Gain value */
		ret = of_property_read_s32_index(np, ranges_property, i * 4 + 1, &s);
		if (ret)
			return ret;

		range->min.gain_db = s;

		/* Second gpios value */
		ret = of_property_read_u32_index(np, ranges_property, i * 4 + 2, &u);
		if (ret)
			return ret;
		if (u > max_gpio_val)
			return -EINVAL;

		range->max.gpio_val = u;

		/* Second Gain value */
		ret = of_property_read_s32_index(np, ranges_property, i * 4 + 3, &s);
		if (ret)
			return ret;

		range->max.gain_db = s;

		/* Save the first point for later usage */
		if (i == 0)
			first_point = range->min;

		/* Fix min and max if needed */
		if (range->min.gain_db > range->max.gain_db)
			swap(range->min, range->max);

		ret = simple_amp_check_new_range(range, ranges->tab_ranges, i);
		if (ret)
			return ret;

		range->nb_points = abs_diff(range->min.gpio_val,
					    range->max.gpio_val) + 1;

		multi->kctrl_max += range->nb_points;
	}

	multi->kctrl_max -= 1;

	/* Sort the tab_range array by gain_db value */
	sort(ranges->tab_ranges, ranges->nb_ranges, sizeof(*ranges->tab_ranges),
	     simple_amp_cmp_ranges, NULL);

	/*
	 * multi->kctrl_val is the index in tab_ranges.
	 *
	 * Choose to have the initial amplification value set to the first point
	 * available in the first range available in the tab_ranges array before
	 * sorting.
	 *
	 * This first point has been identified before sorting. Search for it in
	 * the sorted array in order to set the multi->kctrl_val initial value.
	 */
	multi->kctrl_val = 0;
	for (i = 0; i < ranges->nb_ranges; i++) {
		range = &ranges->tab_ranges[i];

		if (range->min.gpio_val == first_point.gpio_val &&
		    range->min.gain_db == first_point.gain_db)
			break;

		multi->kctrl_val += range->nb_points;

		if (range->max.gpio_val == first_point.gpio_val &&
		    range->max.gain_db == first_point.gain_db) {
			multi->kctrl_val--;
			break;
		}
	}

	return 0;
}

static int simple_amp_parse_labels(struct device *dev,
				   struct simple_amp_multi *multi,
				   const char *labels_property)
{
	struct simple_amp_labels *labels = &multi->labels;
	struct device_node *np = dev->of_node;
	int ret;

	ret = of_property_count_strings(np, labels_property);
	if (ret < 0)
		return ret;

	/* The labels array cannot be empty */
	if (ret == 0)
		return -EINVAL;

	labels->nb_labels = ret;
	if (labels->nb_labels > (1 << multi->gpios->ndescs))
		return -EINVAL;

	labels->tab_labels = devm_kcalloc(dev, labels->nb_labels,
					  sizeof(*labels->tab_labels),
					  GFP_KERNEL);
	if (!labels->tab_labels)
		return -ENOMEM;

	multi->kctrl_max = labels->nb_labels - 1;
	multi->kctrl_val = 0;

	return of_property_read_string_array(np, labels_property, labels->tab_labels,
					     labels->nb_labels);
}

static int simple_amp_parse_multi_gpio(struct device *dev,
				       struct simple_amp_multi *multi,
				       const char *gpios_property,
				       const char *ranges_property,
				       const char *labels_property)
{
	struct device_node *np = dev->of_node;
	int ret;

	/* Start with the value 0 (GPIO inactive). Can be changed later */
	multi->kctrl_val = 0;
	multi->gpios = devm_gpiod_get_array_optional(dev, gpios_property, GPIOD_OUT_LOW);
	if (IS_ERR(multi->gpios))
		return dev_err_probe(dev, PTR_ERR(multi->gpios),
				     "Failed to get '%s' gpios\n",
				     gpios_property);
	if (!multi->gpios)
		return 0;

	if (multi->gpios->ndescs > 16)
		return dev_err_probe(dev, -EINVAL,
				     "Number of '%s' gpios limited to 16\n",
				     gpios_property);

	/* Set default value for the kctrl_max. Can be changed later */
	multi->kctrl_max = (1 << multi->gpios->ndescs) - 1;

	multi->mode = SIMPLE_AMP_MODE_NONE;
	if (of_property_present(np, ranges_property)) {
		ret = simple_amp_parse_ranges(dev, multi, ranges_property);
		if (ret < 0)
			return dev_err_probe(dev, ret, "Failed to parse '%s'\n",
					     ranges_property);
		multi->mode = SIMPLE_AMP_MODE_RANGES;
	} else if (of_property_present(np, labels_property)) {
		ret = simple_amp_parse_labels(dev, multi, labels_property);
		if (ret < 0)
			return dev_err_probe(dev, ret, "Failed to parse '%s'\n",
					     labels_property);

		multi->mode = SIMPLE_AMP_MODE_LABELS;
	}

	return 0;
}

static int simple_amp_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct simple_amp *simple_amp;
	int ret;

	simple_amp = devm_kzalloc(dev, sizeof(*simple_amp), GFP_KERNEL);
	if (!simple_amp)
		return -ENOMEM;
	platform_set_drvdata(pdev, simple_amp);

	simple_amp->data = of_device_get_match_data(dev);
	if (!simple_amp->data)
		return -EINVAL;

	simple_amp->gpiod_enable = devm_gpiod_get_optional(dev, "enable",
							   GPIOD_OUT_LOW);
	if (IS_ERR(simple_amp->gpiod_enable))
		return dev_err_probe(dev, PTR_ERR(simple_amp->gpiod_enable),
				     "Failed to get 'enable' gpio");

	if (simple_amp->data->supports & SIMPLE_AUDIO_SUPPORT_MUTE) {
		ret = simple_amp_parse_single_gpio(dev, &simple_amp->mute, "mute");
		if (ret)
			return ret;
	}

	if (simple_amp->data->supports & SIMPLE_AUDIO_SUPPORT_BYPASS) {
		ret = simple_amp_parse_single_gpio(dev, &simple_amp->bypass, "bypass");
		if (ret)
			return ret;
	}

	if (simple_amp->data->supports & SIMPLE_AUDIO_SUPPORT_PGA) {
		ret = simple_amp_parse_multi_gpio(dev, &simple_amp->gain, "gain",
						  "gain-ranges", "gain-labels");
		if (ret)
			return ret;
	}

	/* Set controls name */
	simple_amp->gain.control_name = "Volume";
	simple_amp->mute.control_name = "Switch";
	simple_amp->bypass.control_name = "Bypass Switch";

	if (simple_amp->gain.mode == SIMPLE_AMP_MODE_LABELS) {
		/*
		 * The gain widget control will use enumerated values.
		 *
		 * Having just "Voltage" and "Switch" widget names with
		 * enumerated values and boolean value can confuse ALSA in terms
		 * of possible values (strings).
		 *
		 * Make things clear and avoid the just "Switch" name in that
		 * case.
		 */
		simple_amp->mute.control_name = "Out Switch";
	}

	return devm_snd_soc_register_component(dev,
					       &simple_amp_component_driver,
					       NULL, 0);
}

static const struct simple_amp_data simple_audio_amplifier_data = {
	.dapm_widgets		= simple_amp_dapm_widgets,
	.num_dapm_widgets	= ARRAY_SIZE(simple_amp_dapm_widgets),
	.dapm_routes		= simple_amp_dapm_routes,
	.num_dapm_routes	= ARRAY_SIZE(simple_amp_dapm_routes),
};

static const struct simple_amp_data simple_audio_mono_pga_data = {
	.supports		= SIMPLE_AUDIO_SUPPORT_PGA |
				  SIMPLE_AUDIO_SUPPORT_POWER_SUPPLIES |
				  SIMPLE_AUDIO_SUPPORT_MUTE |
				  SIMPLE_AUDIO_SUPPORT_BYPASS,
	.dapm_widgets		= simple_amp_mono_pga_dapm_widgets,
	.num_dapm_widgets	= ARRAY_SIZE(simple_amp_mono_pga_dapm_widgets),
	.dapm_routes		= simple_amp_mono_pga_dapm_routes,
	.num_dapm_routes	= ARRAY_SIZE(simple_amp_mono_pga_dapm_routes),
};

static const struct simple_amp_data simple_audio_stereo_pga_data = {
	.supports		= SIMPLE_AUDIO_SUPPORT_PGA |
				  SIMPLE_AUDIO_SUPPORT_POWER_SUPPLIES |
				  SIMPLE_AUDIO_SUPPORT_MUTE |
				  SIMPLE_AUDIO_SUPPORT_BYPASS,
	.dapm_widgets		= simple_amp_stereo_pga_dapm_widgets,
	.num_dapm_widgets	= ARRAY_SIZE(simple_amp_stereo_pga_dapm_widgets),
	.dapm_routes		= simple_amp_stereo_pga_dapm_routes,
	.num_dapm_routes	= ARRAY_SIZE(simple_amp_stereo_pga_dapm_routes),
};

static const struct of_device_id simple_amp_ids[] = {
	{ .compatible = "dioo,dio2125",		  .data = &simple_audio_amplifier_data},
	{ .compatible = "simple-audio-amplifier", .data = &simple_audio_amplifier_data},
	{ .compatible = "gpio-audio-amp-mono",	  .data = &simple_audio_mono_pga_data},
	{ .compatible = "gpio-audio-amp-stereo",  .data = &simple_audio_stereo_pga_data},
	{ }
};
MODULE_DEVICE_TABLE(of, simple_amp_ids);

static struct platform_driver simple_amp_driver = {
	.driver = {
		.name = "simple-amplifier",
		.of_match_table = simple_amp_ids,
	},
	.probe = simple_amp_probe,
};

module_platform_driver(simple_amp_driver);

MODULE_DESCRIPTION("ASoC Simple Audio Amplifier driver");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_AUTHOR("Herve Codina <herve.codina@bootlin.com>");
MODULE_LICENSE("GPL");